OXVA Xlim Pro 3 Vape Kit UK | 1500mAh 30W Refillable Pod Kit

The OXVA Xlim Pro 3 vape kit is a 30W refillable pod kit with a 1500mAh battery, a 1.05-inch HD colour screen and OXVA's first Pulse System. It fills from the top, takes the Xlim pods you may already own, and lets you move between a tight mouth-to-lung (MTL) pull and a looser restricted direct-to-lung (RDL) draw with one airflow slider. If you want a kit that holds its flavour as the battery drops and is simple to run day to day, the Xlim Pro 3 is a strong pick. Order from Vapes Bar with free UK delivery over £25.

Why vapers choose the OXVA Xlim Pro 3

• Pulse System and Photon chip: a high-frequency pulse keeps output steady from the first draw to the last. OXVA says flavour stays above 80% consistent even at 20% battery, where other kits fall to around 50%.
• 1.05-inch HD colour screen: wattage, battery level and resistance are all on one screen, with a 300 nit brightness that stays readable indoors and out. OXVA reports it is 88% larger than the previous generation.
• 1500mAh battery with fast charging: Type-C 5V/2A charging takes the kit to around 80% in about 30 minutes.
• Top-fill pods: pods fill from the top and can be seen through the body, so you can tell when it is time to refill.
• Auto-draw or button: inhale to fire hands-free, or hold the button if you prefer it.
• Adjustable side airflow: slide from a tight, cigarette-like MTL draw to a looser RDL feel.
• Variable power from 5W to 30W so you can tune it to each pod.

Flavour that stays steady

The Xlim Pro 3 is built around OXVA's Intelligent Photon chip and the new Pulse System. In plain terms, it keeps the power going to the coil more evenly while you inhale, which is why OXVA describes the taste as stable "from inhale to exhale". Used with the kit's 0.6Ω and 0.8Ω pods, it works well with both nic salts and 50/50 freebase e-liquid.

Display, controls and battery

Everything runs from one button. Click it once to fire, twice to open the menu, three times to change wattage, four times to lock or unlock, and five times to switch the kit on or off. The screen offers multiple themes and effects, so the look is up to you. With a Type-C cable and a 5V/2A charger you get about 80% in roughly half an hour, which helps if you tend to remember the charger at the last minute.

Pods and compatibility

The kit ships with two 0.6Ω and 0.8Ω Xlim top-fill cartridges, and it is compatible with the wider Xlim pod family, including Xlim V3, Xlim EZ, the empty cartridge and the replacement coils. That means one set of spares covers several OXVA kits. Restock with our OXVA Xlim V3 replacement pods, or see the full OXVA vape pods range.

UK kits come with 2ml TPD-compliant pods. Prefer a snug cigarette-style draw? Go 0.8Ω or 1.2Ω with the airflow closed down. Want more vapour and a bit more airflow? Try 0.6Ω or 0.4Ω with the slider opened up.

Colours

The Xlim Pro 3 comes in a wide range of finishes, from leather textures to ceramic and silk effects:

• Black Leather
• Brown Leather
• Pro Carbon
• Black Carbon
• Sky Blue
• Race Red
• Pink Silk
• Purple Silk
• Titanium Silk
• Forged Blue
• Forged Black
• Ceramic White
• Ceramic Black
• Lavender Purple
• Retro Brown

OXVA Xlim Pro 3 specifications

What is in the box?

• 1 x OXVA Xlim Pro 3 device
• 1 x Xlim top-fill cartridge 0.6Ω (pre-installed)
• 1 x Xlim top-fill cartridge 0.8Ω (spare)
• 1 x Type-C charging cable
• 1 x user manual, suggestion card and button guide

Which nicotine strength suits the kit?

This is a general guide only, based on how many cigarettes someone smoked a day before switching. The UK legal limit for nicotine e-liquid is 20mg/ml, so you will not find anything stronger in a 10ml bottle.

Browse our full range of nic salt e-liquids, including Elux, Hayati and IVG Salt, or grab any four 10ml bottles with our 4 for £10 deal.

How to set up your Xlim Pro 3

1. Charge the kit fully with the Type-C cable before the first use.
2. Open the top-fill port on the pod and fill with your e-liquid. Do not overfill.
3. Let the pod rest for a few minutes so the coil can soak, then take a few gentle draws.
4. Set the wattage to suit the pod, then adjust the airflow slider to taste.

Xlim Pro 3 or Xlim Pro 4?

The Xlim Pro 3 is the more compact of the two and has the bigger screen. If you want liquid-level protection that stops the kit firing when the pod runs low, see the OXVA Xlim Pro 4. For a slimmer, simpler kit, look at the OXVA Xlim 4, or compare everything in our OXVA vape kits range and the wider refillable vape kit collection. Wanting something with more battery? Check the OXVA NeXlim 2 too.

Frequently asked questions

What is the OXVA Xlim Pro 3?

It is a refillable pod vape kit from OXVA with a 1500mAh battery, 5 to 30W output, a 1.05-inch HD colour screen and the Pulse System. It supports both MTL and RDL vaping.

Is the Xlim Pro 3 good for beginners?

Yes. It has one-button control, auto-draw or button firing and a simple airflow slider, and the kit comes with two pods so you can try 0.6Ω and 0.8Ω straight away.

Which pods fit the Xlim Pro 3?

The Xlim Pro 3 uses the Xlim pod family, including Xlim V3 and Xlim EZ cartridges in 0.4, 0.6, 0.8 and 1.2Ω. You can see our current range on the Xlim V3 replacement pods page.

How long does the Xlim Pro 3 take to charge?

With a 5V/2A charger and the supplied Type-C cable, OXVA says it reaches about 80% in 30 minutes.

Which e-liquid should I use?

Nic salts and 50/50 freebase both work well. Pick the strength that matches your smoking habit using the guide above.

How big is the pod?

UK kits ship with 2ml pods to meet TPD rules, filled from the top.

Can I collect in store?

Our shop is on Harborne High Street in Birmingham. See the Vape Shop Birmingham page for details.

This product is intended for adult smokers and vapers aged 18 and over. Nicotine is an addictive chemical. Keep out of reach of children and pets. E-liquid is not included with the kit.