OXVA NeXlim 2 Vape Kit

The OXVA NeXlim 2 is the second-generation NeXlim pod kit, built for vapers who want a compact device that still delivers proper power and flavour. It pairs a 2000mAh built-in battery with a 5–40W output range and OXVA's new UNITECH 3.0 dual mesh pods, making it a strong all-day kit for both mouth-to-lung and restricted direct-to-lung vaping.

Housed in a zinc alloy chassis and weighing around 88g, it's pocket-friendly without feeling cheap. The 0.85" colour screen shows your wattage, battery level, coil resistance and puff count at a glance, with ten screen themes — three available from the start and seven more that unlock as you use the device.

What's new versus the original NeXlim

If you're upgrading, these are the changes that matter:

• Battery up from 1500mAh to 2000mAh — roughly a third more capacity
• Charging up from 5V/2A to 5V/3A — around 80% in 20 minutes, full in under an hour
• UNITECH 3.0 pods replace UNITECH 2.0, with an enlarged condensate chamber for better leak resistance
• Ten screen themes instead of three

Three modes, no guesswork

Smart Mode detects which pod you've fitted and sets the recommended wattage automatically — useful if you'd rather not think about it, and it helps avoid burning a fresh coil.

Eco Mode eases off the output to stretch your battery and e-liquid further between charges.

Power Mode pushes the device to the maximum recommended wattage for your pod, for a warmer, denser draw.

Double-tap the button to switch between Eco and Power. Alongside the modes, a three-level airflow slider on the side lets you tighten the draw for a cigarette-like MTL inhale or open it up for a looser RDL hit.

Dual mesh pods

Every NeXlim pod uses a built-in dual mesh coil with OXVA's Super Pulse system, which heats the e-liquid quickly for consistent flavour from the first puff. The pods are top-filling, so refills are quick and mess-free, and the UNITECH 3.0 design adds a larger condensate chamber to reduce leaking.

The kit ships with 0.6Ω and 0.8Ω pods, both 2ml and TPD-compliant.

Which pod should I use?

The NeXlim 2 is compatible with the full NeXlim pod range, including pods from the original NeXlim, NeXlim Go and NeXlim 2 Mini.

Who it suits

• Moving on from disposables — start with the 1.2Ω or 0.8Ω pod, Smart Mode and a 20mg nic salt
• Upgrading from the original NeXlim — the battery and charging jump is the main reason to switch
• Existing NeXlim owners — your current pods and spare coils carry straight over

Specifications

• Battery: 2000mAh, built-in
• Output: 5–40W adjustable
• Modes: Smart, Eco, Power
• Charging: 5V/3A USB Type-C
• Screen: 0.85" colour display, 10 themes
• Airflow: 3-level side slider
• Activation: Draw-activated (inhale to vape)
• Pods: NeXlim UNITECH 3.0, 2ml, top-fill, dual mesh
• Included resistances: 0.6Ω and 0.8Ω (1.2Ω sold separately)
• Compatible e-liquid: Nic salts and 50/50 freebase
• Material: Zinc alloy, PCTG and PC/PU
• Dimensions: 127.5 × 28.5 × 17.5mm
• Weight: approx. 88g

Battery life varies with wattage, mode and how heavily you vape.

What's in the box

• 1 × OXVA NeXlim 2 device
• 1 × NeXlim UNITECH 3.0 pod, 0.6Ω 2ml (pre-installed)
• 1 × NeXlim UNITECH 3.0 pod, 0.8Ω 2ml
• 1 × USB Type-C cable
• 1 × User manual

How to set up your NeXlim 2

1. Charge the device using the supplied USB-C cable.
2. Remove the sticker from the base of the pod.
3. Fill the pod — pull out the silicone seal to reach the fill port.
4. Prime it. Leave the filled pod for about 10 minutes so the e-liquid soaks into the cotton. Skipping this is the most common cause of a dry hit on a new coil.
5. Insert the pod. Smart Mode will detect it and set the wattage for you.
6. Inhale to vape — no button press needed.
7. Double-tap the button to switch between Eco and Power.
8. Slide the airflow control to tighten or loosen your draw.

Frequently asked questions

Which pods fit the OXVA NeXlim 2?

All NeXlim pods fit, in 0.6Ω, 0.8Ω and 1.2Ω. That includes pods from the original NeXlim, NeXlim Go and NeXlim 2 Mini. NeXlim pods are not interchangeable with XLIM pods.

How long does the battery last?

Most vapers get a full day from the 2000mAh battery. Eco Mode extends that noticeably. Fast 3A charging reaches around 80% in 20 minutes and a full charge in under an hour.

What's the difference between the NeXlim 2 and the NeXlim 2 Mini?

The full-size NeXlim 2 has a 2000mAh battery, 40W maximum output, 3A charging and a 0.85" colour screen. The Mini is smaller and lighter with a 1500mAh battery, 30W output, 2A charging and an LED indicator rather than a screen. Choose the Mini for portability, the NeXlim 2 for power and screen features.

Can I use nic salts?

Yes. All three pod resistances work with nic salts. The 1.2Ω also suits 50/50 freebase e-liquid.

Why is my new pod tasting burnt?

Almost always under-priming. Fill the pod, then wait ten minutes before your first draw so the cotton fully saturates.

Is it draw-activated or button-fired?

Draw-activated. The button is only used for switching modes and adjusting wattage.